AHDU-1460

Parameters

Primary Power

PoE 802.3at/af / 9 - 24 VDC ± 20%, 550 mA maximum (reader current not included)
Primary Host Communication

Ethernet: 100Base-TX
256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications
Secondary Host Communication

BLE 5.2
Third Host Communication

Wi-Fi IEEE 802.11ac 5GHz , or 2.4GHz/5GHz IEEE 802.11n
256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications
Number of Ports

2*TCP/IP
3*RS-485
4*Wiegand
Inputs

4-state supervision, resistor values (5% tolerance),
Normally open contact: use 1.2k, 2.2k. 4.7k or 10k/
Normally closed contact: use 1.2k, 2.2k. 4.7k or 10k/
Dedicated Panel Tamper IO Input*
Dedicated Microchip Control Fire Alarm IO Input & REX Input for catastrophic situation
Outputs

4 relay,
4* Form-C with dry contacts
Normally Open Contact Rating

5A @ 30Vdc resistive
Normally Closed Contact Rating

5A @ 30Vdc resistive
On-Board Monitor

Size: 2.4", Resolution: 320*240, TFT Monitor
Quickly view status of board, connected doors and for configuration information display
On-Board Webserver

Webserver for System Configuration and Management
Dashboard for Controller Status Monitoring,
Device Connection Status Monitoring & Configuration, Performance Status,
server Primary Controller Setting, Network Status Monitoring & Setting,
IP Access Filter, SSL / TLS Certificates Setting,
Access Log Export, Controller Reset, Debug Status Monitoring,
Operation Log Monitoring, User Management,
Date & Time Setting, Daylight Saving Time Setting,
NTP server Setting, General Status, Controller Information
RFID Card Capacity

400,000 (1:N) / 800,000 (1:1)
Maximum RFID Card Number Length

Supports up to 512bits card number length
Mobile Credential Capacity

400,000 (1:N) (Bluetooth)
400,000 (1:N) (NFC)
400,000 (1:N) (Dynamic QR Code)
Fingerprint Capacity

50,000 (1:N) / 100,000 (1:1)
Face Capacity

5,000 (1:N) / 100,000 (1:1)
Palm Capacity

3,000 (1:N) / 5,000 (1:1)
Transaction Buffer

5,000,000 Events
Access Level

100,000 Levels
On-Board Access Point Control

4 access point on board
On-Board Reader Support

3 (OSDP over RS-485) or 4 (Wiegand) with on-board IO
Maximum Access Point

4
Maximum Readers

8
Maximum Inputs

384 (using Armatura AHEB-1602)
Maximum Outputs

385 (using Armatura AHEB-0216)
Maximum IO Board

24pcs (3*High Speed RS-485 communication)
RFID / Biometrics Reader Interface
Maximum Input Current

12 - 24 Vdc +/- 10% regulated, 500 mA maximum each reader
RS-485 Protocol

AES-128, OSDP Secure Channel
OSDP Mode

9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
3rd Party reader: support OSDP V2.2 or above
Wiegand

Read: support up to 128 bits / Write: Support 26 / 34 / 37 bit, and other customised card formats
Tamper Input (Wiegand)

TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
Buzzer Output (Wiegand)

TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
LED Output (Wiegand)

TTL levels, high > 3 V, low < 0.5 V, 5 mA source/sink maximum
Data Inputs

RS-485, OSDP and Wiegand standards supported.
Maximum RS-485 /OSDP cable length: 3937ft. (1200m)
Maximum Wiegand cable length: 328ft (100m)
IO Expansion Board Interface
RS-485 Protocol

AES-128, OSDP V2 Secure Channel
OSDP Mode

9600-115200 bps, OSDP V2.2, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit. Maximum cable length: 2,000 ft. (609.6m)
Data Inputs

OSDP and Wiegand standards supported.
Maximum cable length: 500 ft. (152m)
Cable Requirement
Power & Relays

One twisted pair, 18 to 16 AWG
Ethernet

CAT-5, minimum 330 ft. (100m)
Ethernet Failover Port

CAT-5, minimum 330 ft. (100m)
RS-485 Reader Port

9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
RS-485 I/O Device Port

9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
RS-485 Failover Port

9600-115200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and1 stop bit.
One twisted pair with drain wire and shield, 120 ohm resistance, 22-18 AWG,
Maximum cable length: 3937ft (1200m)
Wiegand Port

20 AWG shielded Wiegand wire, 328ft. (100m)
Mechanical
Weight

30oz (830g)
DIN Rail Mounting

Supported DIN35 Rail
Compatible with UTA89 Din Rail Adapter for screwing on switchgear (Sold Separately)
Wall mount
Housing Material

ABS-PC UL-94 V2
Operating Temperature

-22°F ~ 158°F (-30°C~70°C), Operating & Storage
Operating Humidity

0-95% RHNC
Security Rating

Secure Data Storage in EAL 5+ Certified Crypto Chip
Software Interface
TCP/IP Mode

Ethernet: 100Base-TX
TCP/IP Protocol

NTP, SNMP V2 /V3, 802.1X, VLAN, SSH, MQTT, IPv4, IPv6, DNS, DDNS
TCP/IP Encryption

Complies with TLS1.2, AES-256 end to end secure communication channel
TCP/IP Communication

TCP/IP Communication
Supported Software

Armatura One Security System

Add to Comparison

AHDU-1460

Parameters

Download

Others